BIRO 3334SS-4003FH Fixed Head Meat and Fish Saw
3HP Bandsaw Fixed Head
The BIRO 3334SS-4003FH Fixed Head Meat and Fish Saw has what you need for high volume production of retail cuts. The rigid fixed stainless steel head provides vibration free operation at higher blade speeds. This lets you use a narrow blade which helps you minimize product waste, operator fatigue, and maximize productivity and profit. Like all BIRO saws, the 3334SS-4003FH has heavy duty stainless steel construction and a roller bearing drive system, a design that has proven over the years to be more durable with lower maintenance. Your saw will have longer bearing life at the higher blade speeds, and it will easily withstand the heavy use typical of meat and fish plants. We also offer such attractive options as a split platter for quick blade changes, double flange wheels, a removable lower wheel, and stainless steel wheels.
Construction: Heavy Gauge stainless steel base, legs, head and door structure.
Standard Features: Two saw blades, operation and parts manual, safety wall poster, end cut safety pusher plate.
Switch: Watertight magnetic, thermal overload, under voltage protection.
Head and Door: Stainless steel, movable on Std.1433 and fixed on 1433FH.
Base Structure: Stainless steel, removable door on both.
Blade Standard: Hard tooth, .022 inch (.5 mm) thick, three teeth per inch (8.5 mm between teeth), 5/8 inch (16 mm) wide, 108 inches (2743 mm) long (two supplied with each saw).
Blade Speed: Approximately 3550 feet (1082 m) per minute. 1433 Weight:
Blade Tension: 1433 – ratchet arm and cam against tension spring gauge. 1433FH – factory preset spring, screw handle assembly.
Blade Wheels: 14” (356 mm) dia. cast iron, chrome nickel plating, upper wheel assembly lifts out. Lower wheel removable.
Blade Back-up Guides: Upper and lower blade backup guide assemblies, removable, with long life carbide back-up inserts.
Earings: Heavy duty tapered roller bearings used in upper wheel and lower bearing housings.
Catch Pan: Poly, extra deep (rounded corners), pan sealed off from other parts of base, accesible through base hinged door.
Cleaning Unit: Stainless steel body, long-life carbide guides, steel saw cleaners, removable as a unit for easy cleaning (assembly also adjustable as a unit).
Drive System: Non slip silent v-belt, tension adjustable. Legs: Four stainless steel leg bolt levelers.
Meat Carriage: Stainless steel with 8 stainless steel bearings EZ flow.
Meat Gauge Plate: Stainless steel faced, adjustable from 1/16” (1.59 mm) to 6-1/2” (165 mm) locks in position, can be disengaged, entire assembly removable for cleaning.
Motor Compartment: Sealed off from meat contact areas, easily accessible through removable panel door.
Rear (Table) Platter: All stainless steel, held in place with two push-pull hold down stainless steel rods. afety
End Cut Pusher Plate: Standard, removable, pusher plate storage hanger provided.
Options (NC): 4200 feet (1280 m) per minute blade speed.
Options (EC): Power cord and plug, front table extension, stainless steel single flange blade wheels, stationary front table, double flange cast blade wheels, split rear platter, longer meat gauge plates, meat gauge plate stabilizer, bone pusher assembly.
Uncrated: 390 lbs. (176.9 kg.) approximate.
Crated: 492 lbs (223.2 kg.) approximate. 1433FH Weight:
Uncrated: 397 lbs. (180 kg.) approximate.
Crated: 489 lbs (222 kg.) approximate.
Certification: U.S.D.A., U.L., N.S.F., C.S.A. Dimensions Crated: 1433: L = 49”(124.5 cm),W = 38”(96.5 cm), H = 40”(101.6 cm). 1433FH: L= 49” (124.5 cm), W = 38”(96.5 cm), H =81”(205.7 cm).
Stainless Steel Wheels